Skip to content

Careful window and gutter work, quotes by phone at (843) 396-2337

St. Stephen · Moncks Corner · Wyboo · Kingstree

(843) 396-2337
Worker brushing dust off a removed window screen leaned against a brick house wall, with more screens, a bucket and an aluminum ladder on the driveway

ServicesScreen Cleaning & Repair

Window Screen Cleaning & Repair in St. Stephen

We take your screens down, wash the mesh and frames by hand, and fix what we find: torn fiberglass, cracked spline, bent frames and missing tension springs. Each screen goes back in the window it came from, fitting snug.

What screen cleaning and repair covers

A window screen is simple: a roll-formed aluminum frame, a sheet of mesh, and a rubber cord called spline that locks the mesh into a channel. Over time, each part fails in its own way. Mesh collects pollen and road dust until it looks gray. Spline dries out in the sun, shrinks and lets the mesh go slack. Frames get bumped by ladders or mowers and stop sitting square.

Our screen cleaning and repair handles all of it in one visit. We wash every screen, look at it closely, and repair the ones that need it, so you are not left with clean glass behind a torn, dusty screen. We treat it the way we would want a neighbor to treat our own house: careful with your siding and plants, clear about what we found, and tidy when we leave.

Screen work pairs naturally with residential window cleaning and window track and sill cleaning, since the screens have to come out for both anyway.

What we do with each screen

Removal and labeling

We pull each screen and mark which window it came from. Screens that look identical often differ by a quarter inch, and the wrong one will rattle or leave a gap.

Hand washing

Mesh is scrubbed with a soft brush and a mild detergent solution, then rinsed at low pressure. We do not pressure wash screens, because a hard spray stretches fiberglass mesh and can push it out of the spline channel.

Frame cleaning

Aluminum frames build up a chalky oxidation and grime in the corners. We wipe frames down so they do not leave dirty streaks on freshly cleaned sills.

Rescreening

Torn or sagging mesh is cut out, the old spline is pulled, and new mesh is rolled in with fresh spline at even tension. We trim the edge clean so no loose strands catch on the frame.

Hardware and frame fixes

We replace missing tension springs, plunger pins and pull tabs, and straighten frames that are bent but sound. If a frame is too far gone to sit square, we tell you plainly instead of forcing it back in.

Signs your screens need attention

  • A gray haze over the window

    Dirty mesh filters light and airflow. If a room looks dim even after the glass is cleaned, the screen is often the reason.

  • Pinholes and small tears

    Mosquitoes and gnats only need a tiny gap. Holes usually start where mesh rubs a corner or where a pet has pushed on it.

  • Mesh bowing or pulling loose

    When spline hardens and cracks, it stops gripping the mesh. The screen sags in the middle or peels away along one edge.

  • Screens that rattle or fall out

    Missing springs, broken pins or a slightly bent frame keep a screen from seating in its track. Wind can then work it loose entirely.

  • Yellow film every spring

    Pine pollen settles deep in the mesh weave each spring. Rain alone will not rinse it out, and it smears onto glass the next time it gets wet.

How the visit runs

  1. 1

    A short phone conversation

    You tell us how many screens you have, roughly what shape they are in, and whether any are on upper floors. That gives us enough to explain what to expect and what affects the quote.

  2. 2

    Walk-around and removal

    On the day, we walk the house with you or on our own if you prefer, note any damage, and take the screens down. Screens that only come out from inside are handled with care around your floors and furniture.

  3. 3

    Washing and inspection

    Screens are washed on a clean surface, rinsed and left to dry. While they dry, we check every corner, spline run and spring, and show you anything worth repairing before we start on it.

  4. 4

    Repairs and reinstall

    Approved repairs are done, then each screen goes back into its own window. We check that it seats firmly, that the mesh is taut, and we pick up any trimmings and old spline before we go.

What affects the price of screen work

Screen pricing depends mostly on how many screens you have and how much each one needs. A house of clean, intact screens costs far less than one where half need new mesh. We go over the specifics on the phone and confirm anything extra with you before we do it.

Number and size of screens
More screens means more handling and washing time. Large picture-window and patio screens take longer than standard double-hung sizes.
Wash only or rescreen
A screen that just needs washing is quick. Rescreening means new mesh and spline, so it adds material and labor for each screen.
Mesh type
Standard fiberglass is the most common. Aluminum mesh and heavier pet-resistant mesh cost more and take more effort to roll in evenly.
Access and frame condition
Second-story screens, screens that remove from inside, and frames that need straightening or new hardware all add time.
Combined services
If we are already doing window cleaning or track and sill cleaning, the screens are coming out anyway, which makes screen work more efficient to add.

Screen cleaning and repair questions

Something not covered here? (843) 396-2337

Can you get screens off second-story windows?

Yes. Some upper screens come off from outside with a ladder, others only from inside the room. We will ask about your windows on the phone so we bring the right equipment and know whether we need access indoors.

Should I repair a torn screen or have the whole thing replaced?

Most torn screens only need new mesh and spline, since the aluminum frame is usually fine. Rescreening keeps the original frame, which already fits your window. We only suggest giving up on a frame when it is cracked at the corners or bent past straightening.

Do you have mesh that holds up to pets?

We can install pet-resistant mesh, which is a thicker vinyl-coated polyester that stands up to claws far better than standard fiberglass. It is a little heavier and slightly darker, so we usually suggest it only for the doors and low windows a pet actually reaches.

Is screen work covered by a warranty?

Customers on a service plan get a 3-month warranty on our work. If you are on a plan and a screen we serviced has a problem in that window, let us know by phone and we will come take a look.

Do I need to be home while you work?

Not if every screen comes off from outside. If any screens remove from inside, someone will need to let us in for that part. We will sort that out with you when we set the visit.

Ready to have your screens looked after

Tell us how many screens you have and what they look like, and we will explain how we would handle them. Serving St. Stephen and nearby towns like Moncks Corner and Goose Creek.